Hydraulic Power Tong
XQB89/8XY Hydraulic Power Tong
XQB89/8XY hydraulic power tong is a kind of close-mouth power tong for workover operations. It is assembled by close-mouth main tong and close-mouth back-up tong. The drift diameter of the main and back-up tongs is Φ127 mm and the low gear torque rating is 8 kN·m.
XQB89/8XY Hydraulic Power Tong
Technical Parameters
XQ114/6YC Hydraulic Power Tong
XQ114/6YC Hydraulic Power Tong
XQ114/6YC type hydraulic power tong belongs to the open-mouth power tongs, its power is imported from low speed high pulling torque hydraulic motor, transmitted by straight-cut gear, shifted by two level gears, and reinforced by jaw plate cam clamp system. This product adopts multiple new techniques. If equipped with different hydraulic devices, it may meet the different requirements of the loading and unloading oil pipe threads Φ60 (2 3/8″), Φ73 (2 7/8″), Φ89 (3 1/2″), Φ114 (4 1/2″) during the workover period under different environmental conditions.
Technical Specifications
XQ28/1.8Y Hydraulic Power Tong
XQ28/1.8Y type hydraulic power tong belongs to the open-mouth power tongs, its power is imported from low speed high pulling torque hydraulic motor, transmitted by straight-cut gear, shifted by two level gears, and reinforced by jaw plate cam clamp system. This product adopts multiple new techniques. If equipped with different hydraulic devices, it may meet the different requirements of the loading and unloading oil pipe threads during the workover period under different environmental conditions.
Technical Specifications of XQ28/1.8Y Hydraulic Power Tong
CTK Pumping Rod Tripping Power Tong
CTK pumping rod tripping power tong is a kind of open-mouth power tongs, its power is imported from low speed high pulling torque hydraulic motor, transmitted by straight-cut gear, shifted by two level gears, and reinforced by butterfly shape planetary claw three-point clamping system. This product is specifically designed for pumping rod tripping, it can tightly clamp the rod at any position so as to mechanize its tripping.
CTK Pumping Rod Tripping Power Tong
Technical Parameters of CTK Pumping Rod Tripping Power Tong
XQ140/12Y Hydraulic Power Tong
XQ140/12Y type hydraulic power tong belongs to the open-mouth power tongs, its power is imported from low speed high pulling torque hydraulic motor, transmitted by straight-cut gear, shifted by four level gears, and reinforced by jaw plate cam clamp system. This product adopts multiple new techniques. If equipped with different hydraulic devices, it may meet the different requirements of the loading and unloading oil pipe threads during the workover period under different environmental conditions.
XQ140/12Y Hydraulic Power Tong
Technical Parameters of XQ140/12Y Hydraulic Power Tong
XQ89/3YD (3YF) Hydraulic Power Tong
XQ89/3YD(3YF) type hydraulic power tong belongs to the open-mouth power tongs, its power is imported from low speed high pulling torque hydraulic motor, transmitted by straight-cut gear, shifted by two level gears, and reinforced by jaw plate cam clamp system. This product adopts multiple new techniques. If equipped with different hydraulic devices, it may meet the different requirements of the loading and unloading oil pipe threads Φ60 (2 3/8″), Φ73 (2 7/8″), Φ89 (31/2″) during the workover period under different environmental conditions.
XQ89/3YD (3YF) Hydraulic Power Tong
Technical Specifications
ZQ Series of Drilling Pipe Power Tongs
ZQ series of drilling pipe power tongs are a kind of perfect wellhead tools that can be extensively used in the fields of drilling or workover offshore and inland and upper unloading the pipe column screw thread during the workover job. The tongs have the roles of enhancing the working efficiency, safety and labor-saving. These series of tongs are open-mouth type, can freely escape the pipe columns with very good maneuverability. The torque tongs and cupboard button tongs are assembled as a whole, where upper unloading buttons replace the catheads, hanging tongs and spinning ropes. The power tongs conform to the SY/T5074 standards and API Spec 7K specifications.
ZQ Series Of Drilling Pipe Power Tongs
Technical Specifications
TQ Series of Casing Power Tongs
The casing power tongs are extensively used in oil field for upper unloading the casing or casing screw thread during the operation of lower casing. The products are powered by hydraulic pressure, adopting the tilt cylinder type high pulling torque motor and mechanical type shift gear to make the tongs structurally simple and reliable, operationally safe and convenient. The tongs’ pressure, torque and number of turns can be monitored and controlled by computer by equipped torque meter. Relevant national patents of invention have already achieved. The casing power tongs meet the requirements of SY/T5074 standard and API Spec 7K specifications.
Technical Specifications of TQ Series of Casing Power Tongs
