MFM350 Hand Power Flange Facer

The PIINC MFM350 Hand-Powered Mini Flange Facer is an ultra-portable flange resurfacing machine designed for on-site field machining of pipe flanges and other compatible sealing surfaces. Its compact, lightweight design allows one operator to set up the machine and begin machining within minutes, making it a practical solution for flange maintenance and repair in locations where external power sources are unavailable.

With a facing diameter range of 25.4–350 mm and a clamping range of 25.4–304.5 mm, the MFM350 is suitable for resurfacing flat-face and raised-face flanges, as well as lens-ring joint flanges. The hand-powered design eliminates the need for electric, hydraulic, or pneumatic power, allowing the machine to be used in a wide range of field conditions.

Supplied with two different lead screws providing two feed rates, the MFM350 offers flexibility for different flange resurfacing requirements. It uses standard 1/2-inch cutting tools and provides a convenient option for maintenance teams seeking a portable flange facing tool for on-site repair work.

Key Features and Benefits

1. Ultra-Portable and Lightweight Design

The MFM350 is designed for convenient transportation and on-site use. With a stated weight of approximately 7–7.5 kg, it is easy to handle and suitable for field machining tasks where portability is important.

2. Hand-Powered Operation – No External Power Required

The machine operates manually using a handle drive, eliminating the need for an electrical supply, hydraulic power unit, or compressed air. This allows flange resurfacing to be performed in locations without access to external power sources.

3. Wide Flange Facing Range

The MFM350 can machine facing diameters from 25.4 mm to 350 mm, supporting a variety of flange sizes and suitable sealing-surface repair applications.

4. Flexible Mounting and Clamping Range

With a clamping range of 25.4–304.5 mm, the MFM350 accommodates a range of flange internal diameters within its specified mounting capacity.

5. Two Lead Screws for Different Feed Rates

The machine is supplied with two different lead screws that provide two feed rates. This gives operators flexibility when resurfacing different flange types and sealing surfaces.

6. Suitable for Multiple Flange Facing Applications

The MFM350 is designed for on-site resurfacing of:

• Raised-face pipe flanges

• Flat-face pipe flanges

• Lens-ring joint flanges

Its portable design makes it a useful option for restoring suitable flange sealing surfaces without transporting the component to a workshop.

7. Quick Setup for Field Machining

The machine is designed to allow one operator to set it up and begin machining within a few minutes. This helps simplify preparation for field maintenance and flange repair tasks.

8. Compatible with Standard 1/2-Inch Cutting Tools

The MFM350 uses standard 1/2-inch cutting tools, providing a straightforward tooling option for flange facing operations.

Technical Specifications

• Model: MFM350

• Product type: Hand-powered mini flange facer

• Drive method: Manual handle drive

• Facing diameter: 25.4–350 mm (1–13.78 in)

• Clamping range: 25.4–304.5 mm (1–12 in)

• Weight: Approximately 7–7.5 kg, as stated in the source description

• Feed system: Two lead screws providing two different feed rates

• Cutting tool compatibility: Standard 1/2-inch cutting tools

• External power requirement: None; no electric, hydraulic, or pneumatic power supply required

• Setup: Designed for setup by one operator

Applications

The PIINC MFM350 Hand-Powered Mini Flange Facer is suitable for field machining and maintenance applications involving compatible flange sealing surfaces, including:

• On-site pipe flange resurfacing

• Raised-face flange repair

• Flat-face flange resurfacing

• Lens-ring joint flange resurfacing

• Flange maintenance in locations without external power

• Field repair work where a compact, portable flange facing machine is preferred

Why Choose the PIINC MFM350 Mini Flange Facer?

The PIINC MFM350 combines a lightweight design, manual operation, and a broad facing diameter range in a compact field machining tool. Its independence from external power sources makes it particularly practical for on-site flange maintenance, while its two feed rates provide flexibility for different resurfacing tasks.

For maintenance contractors, industrial service teams, and field technicians looking for a portable hand-powered flange facer, mini flange facing machine, or on-site flange resurfacing tool, the MFM350 offers a convenient solution for suitable flange repair applications.