PIPJL30 Portable Journal Lathe

SEO Subtitle: Portable Shaft Machining and Journal Repair Machine for On-Site Resurfacing of Large Shafts and Bearing Seats

The PIINC PIPJL30 Portable Journal Lathe is designed for on-site resurfacing and repair of large shafts, stub shafts, bearing journals, bearing seats, and O-ring grooves. Its portable design allows machining to be performed directly at the worksite, helping reduce the need to transport heavy components to a conventional machine shop.

Weighing only 79 kg, the PIPJL30 is designed for convenient transportation and setup. It can be installed at the end of a shaft using four drilled and tapped mounting holes, providing a practical solution for field machining and maintenance applications.

With an adjustable tool head, round tool bits, and a 1.6 HP electric motor, the PIPJL30 supports controlled turning operations with automatic feed and rotation. It is designed for horizontal and vertical machining, as well as machining at different angles, including top-to-bottom applications where suitable installation conditions permit.

Key Features and Benefits

1. Portable On-Site Shaft Machining

• Designed for resurfacing large shafts and stub shafts directly at the worksite.

• Suitable for machining bearing journals, bearing seats, and O-ring grooves.

• Helps reduce the need to remove and transport large components for workshop machining.

• Suitable for industrial maintenance and shaft repair applications.

2. Lightweight Design

• Total machine weight: only 79 kg.

• Compact, portable construction supports transportation and setup at different job sites.

• Suitable for on-site machining where access and equipment handling are important considerations.

3. End-of-Shaft Installation

The PIPJL30 can be installed at the end of a shaft using four drilled and tapped mounting holes. This mounting arrangement provides a practical installation method for shaft resurfacing and repair work.

4. Adjustable Tool Head for Turning Operations

• The adjustable tool head allows convenient positioning of the cutting tool.

• Round tool bits support turning operations for resurfacing and repair.

• Adjustable tool positioning helps operators set up the machine for the required machining task.

5. Electric Drive with Automatic Feed and Rotation

The PIPJL30 is driven by a 1.6 HP electric motor. The drive system supports machine rotation and automatic feed, helping operators carry out turning operations during on-site shaft repair.

6. Flexible Machining Orientation

The PIPJL30 is designed for horizontal and vertical machining, including machining at different angles and top-to-bottom orientations. Actual installation and operation depend on the shaft configuration, mounting arrangement, and site conditions.

Technical Specifications

• Model: PIPJL30

• Machine Type: Portable Journal Lathe

• Shaft Diameter Range: 50–250 mm

• Maximum Reach Range: 320 mm

• Machine Weight: 79 kg

• Drive Motor Power: 1.6 HP

• Drive Type: Electric motor

• Feed and Rotation: Automatic feed and rotation

• Tooling: Adjustable tool head and round tool bits

• Installation Method: End-of-shaft mounting using four drilled and tapped holes

• Machining Orientation: Horizontal, vertical, and angled machining, subject to installation conditions

• Primary Applications: Shaft resurfacing, bearing journal repair, bearing seat machining, stub shaft repair, and O-ring groove machining

Typical Applications

The PIINC PIPJL30 Portable Journal Lathe is suitable for on-site maintenance and resurfacing of:

• Large shafts

• Stub shafts

• Bearing journals

• Bearing seats

• O-ring grooves

• Industrial shaft surfaces requiring repair

Why Choose the PIINC PIPJL30 Portable Journal Lathe?

The PIPJL30 combines a lightweight 79 kg design, end-of-shaft mounting, and electric-powered turning functions in a portable machining solution. Its shaft diameter range of 50–250 mm and maximum reach range of 320 mm make it suitable for a range of on-site shaft repair and resurfacing tasks.

For industrial maintenance teams, repair contractors, and field service technicians, the PIPJL30 offers a practical way to machine suitable shaft surfaces in place, reducing the handling associated with moving large components to a workshop.